FCC

FOR ANY ENQUIRIES
CONTACT US contact us

JCK Chemicals Pty Ltd. T/A JCK Distributors

46 Korella Street Mullaloo Western Australia, 6027

small icons (08) 9403 0699
small icons (08) 9403 0799
small icons info at jckdistributors dot com dot au

AFFILIATES:


EVAPORUST - RUST REMOVER

stone care
EVAPORUST -
REMOVER
Buy Now
BULK ORDER
  • Non-toxic
  • No Fumes or bad odours
  • Biodegradable
  • Environmentally Safe
  • Non flammable
  • Safe on skin
  • Non- corrosive
  • Will not harm un-rusted steel
  • Safe on other metals
  • Excellent rust effortlessly in minutes
  • Contains no acids, Alkalis or solvents
  • Will not affect rubber, plastic, PVC, Copper, Brass Aluminium or vinyl

Directions:
Into a container, pour a sufficient amount of Evapo-Rust™ to completely cover the rusted object
Immerse the rusty object in the solution and leave it for 10 minutes for light rust or overnight for extremely heavy rust.
When finished, rinse item with water.  If deep rust remains in pits, re-immerse item until all the rust is gone.  Un-rusted metal will not be affected. To prevent flash rusting, dip the item back into solution.  Then allow item to air dry.  This will prevent rust for up to two weeks.

 

PERFORMANCE
Rapidly removes rust from ferrous metal and stainless steel.

  • Non-corrosive, non-flammable, non-toxic
  • Biodegradable, Contains no VOC's or HAP's
  • Contains no solvents, acids, bases or hazardous ingredients
  • Works at room temperature, requires no special equipment
  • Easy and safe to use
  • Safe on soft metals, plastic, rubber, PVC and other surfaces unharmed by water alone
  • Inhibits rust from reforming for up to 4 weeks
  • Will not pit or discolor un-rusted steel
  • Patent Pending

DESCRIPTION
EVAPO-RUST™ has been proven effective to remove even deep rust on all types of mild steel and iron.  It is safe on all surfaces and will not harm copper, brass, aluminum, plastic, rubber or vinyl.  EVAPO-RUST™ is non-toxic, non-corrosive, biodegradable and contains no acids or alkalis.  It is non-flammable and contains no petroleum solvents.

DIRECTIONS
Pre-clean item to remove oil and dirt.  Rinse item and immerse item fully in EVAPO-RUST™ for 20 minutes.  Check progress periodically.  Once rust is removed, rinse item with water.  To prevent re-rusting simply dip the item back in EVAPO-RUST™ solution and allow to dry.  Deeply rusted parts (5mm or deeper) may require overnight soaking.  EVAPO-RUST™ can be used over and over until performance drops off.  When ready to dispose of spent EVAPO-RUST™, only the iron content of the solution will dictate disposal method.  In most cases, it can be safely put down the drain.

PROPERTIES

Appearance   Yellow liquid
Odor   Slight odor
Foam   Slight
pH @ 1%   6.0-7.1

Environmental Data
Biodegradable, Iron content dictates disposal method

Packaging 
1 gallon jugs
4X1 gallon cases
5 gallon pails
55 gallon drums

Find out more